Opticon OPR 2001 Manuel d'utilisateur télécharger pdf (Page 11)

Opticon

OPR 2001

Specifications Manual

6. Optical Specifications

6.1. Laser Scanning Specifications

Parameter Specification Unit

Light-emitting element Red laser diode -

Emission wavelength 650 ±10 (25° C) nm

Light output 1.0 or less mW

Scanning method Bi-directional scanning -

Scanning speed 100 ±20 scans/s

Scan angle: 54 ±5 ° Scan angle

Read angle: 44 (Min) °

6.2. Laser Scanning Standard

6.2.1. Laser Scanning Tilt

Scanning tilt is the vertical difference between the ends of a laser scan line.

• Up to 0.92° in a vertical direction from the scan origin (mirror motor mirror).

• Up to 2.46 mm when measured at 150 mm from the scan origin.

Measurement is done at the center of the laser scan line.

6.2.2.

Scanning Curvature

Scanning curvature is the maximum difference between the laser scan line and

the line between the ends of the laser scan line.

• Up to 1.17° in a vertical direction from the scan origin (mirror motor mirror).

• Up to 3.06 mm when measured at 150 mm from the scan origin.

Measurement is done from the center of the laser scan line.

Figure 2: Laser scanning tilt and curvature

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Pas de commentaire

Opticon OPR 2001 Manuel d'utilisateur Page 11